MSI CellScale 3750CS User Manual Download Page 94 | Manualshive

Page: 94 / 94

background image

THE MSI LIMITED WARRANTY

MEASUREMENT SYSTEMS INTERNATIONAL,INC.,WARRANTS load sensing elements and meters against
defects in workmanship and materials for a period of one year from date of purchase and warrants electrical cables
and batteries against the same defects for a period of ninety (90)days from date of purchase.

Any device which proves defective during the warranty period will be replaced or repaired at no charge;provided
that the defective device is returned to the Company freight pre-paid.

In no event shall the Company be liable for the cost of any repairs or alterations made by others except those
repairs or alterations made with its specific written consent,nor shall the Company be liable for any damages or
delays whether caused by defective workmanship,materials or otherwise.

The Company shall not be liable for any personal injury or property damage resulting from the handling,
possession or use of the equipment by the customer.

The warranty set forth herein is exclusive and is expressly in lieu of all other warranties,express or implied,
including without limitation any implied warranties of merchantability or fitness,or of any other obligations
or liability on the part of the Company.

The liability of the Company under this warranty is limited solely to repairing or replacing its products during
the warranty periods;and the final judgment and disposition of all claims will be made by MEASUREMENT
SYSTEMS INTERNATIONAL,INC.

14240 Interurban Avenue South STE 200
Seattle, Washington

98168-4661 U.S.A

.

Ph:

206-433-0199

• Fax:

206-244-8470

Web: www.msiscales.com • Email: [email protected]

“We Weigh Quality First”

Measurement Systems International

© 2004 by Measurement Systems International
Printed in U.S.A.
PUB.269-06-01A

MADE IN THE

USA

«
...
92
93
94

Summary of Contents for CellScale 3750CS































































































Reviews:

No comments

Related manuals for CellScale 3750CS

Brand: Gamko Pages: 32

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: ZEPP Pages: 36

FleetMaster Air FW8 Series

Brand: SAF-HOLLAND Pages: 20

Brand: Carinae Sports Pages: 22

Brand: Elk Products Pages: 2

Brand: Elk Pages: 2

Brand: Olympus Pages: 43

Brand: Ultrak Pages: 16

EVOLUTION PACK FOR NDS LITE

Brand: GAMERON Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands