MSI CellScale 3750CS User Manual Download Page 43

Page: 43 / 94

MSI-9000 CellScale

System • 3750CS User Guide Page 43

MEASUREMENT SYSTEMS INTERNATIONAL

Software V1-15 to 1-20

To Turn on the Backlight

BAR GRAPH MENU

Controls the operation and calibration of the Bar graph. The Bar graph is used to monitor the RF network

activity, or the bar graph can indicate relative weight. In conjunction with the “NUM DISP” setup mode,

the BAR 0% and BAR 100% setting also control the numeric display PER CENT parameters. The 0% and

100% points of the bar graph can be set to any weight within the capacity of the scale. Normally a lower

weight is set for the 0% value. If desired, the 0% point can be set to a higher value than the 100% point if

pour down or similar applications dictate.
The BARMODE menu has three settings:

1) MODEM – Monitors the RF activity. Each segment represents successful packet transmissions. When

the Bar graph starts to shorten, multiple retries of packet transmissions are failing. This will happen when

the signal is blocked or nearly out of range.

2) PER CENT – The Bar graph represents a user programmed span of the weight reading. The 100% and 0%

settings are programmable anywhere within the capacity of the scale.

3) DISABLED – Turns off the Bar graph.

The 3750CS defaults to the MODEM setting of the Bar graph. The following procedure shows how to set up the Bar graph for PER CENT operation.

1) Push SETUP.

2) Push the POWER key. The first submenu

“AUTOOFF” appears.

3) Push the UP key. The submenu reads “LIGHT-

ING”.

4) Push ENTER. The message shows the current

LIGHTING setting.

In this example, we’ll change the lighting from “ON” to “AUTO”.

5) Use the DOWN scroll key to change to “AUTO”.

6) Push ENTER to set the LIGHTING mode and leave

the submenu.

7) Push EXIT to return to normal scale operation.

SETUP

AUTOOFF

LIGHTING

AUTO

LIGHTING

Summary of Contents for CellScale 3750CS































































































Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands

MSI CellScale 3750CS, User Manual

Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands