MSI CellScale 3750CS User Manual Download Page 36

Page: 36 / 94

Page 36 MSI-3750CS RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

VIEW TOTAL

Displays the current Total value of the selected ID and allows the total(s) to be cleared.

The following examples assume the F4 function key is programmed to “VIEW TOTAL”. If the VIEW TOTAL key has been moved to a different F key use

that key for the following procedure.

To Display the Current ID#’s Totaled Weight

To Enable/Disable Total Motion Detect

Push VIEW TOTAL (Usually F4). The numeric

display shows the accumulated weight. The message

display indicates the number of weighments in the

Total. This screen will remain for 4 seconds.

∑ MODE

∑ MOTION

ENABLED

DISABLED

∑ MOTION

1) Push SETUP.
2) Push the TOTAL switch (usually F3). The menu

choice “

∑

MODE” appears.

3) Push the UP key to the menu choice

“

∑

MOTION”.

4) Push ENTER. The message display shows

“ENABLED” or “DISABLED”.

5) Toggle the motion condition with the UP or DOWN

key.

ENABLED means totals will not function until the weight has settled.

DISABLED indicates that motion conditions are ignored.

6) Set the new Total Motion condition by pushing

ENTER.

7) Push the EXIT key to return to normal scale

operation.

To Erase the last Totaled Weight

If the last totaled (automatic or manual) weighment was a mistake, it can be erased with the following procedure. This erases only the last weighed value.

1) Push VIEW TOTAL (Usually F4) followed imme-

diately by CLR (ZERO).

The display reads “CLRLAST

∑

”.

2) Press ENTER. The last weight totaled is subtracted

and the number of weighments counter is reduced

by one.

If you change your mind, push EXIT to cancel the Clear Last Total

operation.

1) Push

VIEW TOTAL

(usually F4) followed quickly

by the (2) PRINT key. Just the Total and number of

samples of the current ID will print.

To Print the Current ID#’s Totaled Weight

Summary of Contents for CellScale 3750CS































































































Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands

MSI CellScale 3750CS, User Manual

Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands