Page 30 MSI-3750CS RF Weighmeter • User Guide
3750CS
C
ELL
S
CALE RF DIGITAL WEIGHT INDICATOR
®
Default ID Code
The 3750CS maintains a default ID Code that functions identically to user entered ID Codes except that no name
is required. Any totals taken in the default ID Code are included in the grand total. The best way to recognize that
the default code is in operation is that it has no ID Code name. The default ID Code can be given a name using
“SETUP ID CODES”, but it will not be alphabetized, it will always be first on the list.
Note: The default ID Code is number 1, therefore using the @C command (see section 7) will always start with #2 for user entered ID Codes.
To Scroll through Existing ID Codes
1
2
TEST 1a
2
ZZZZZZZZ
2
AARDVARK
3
1
2
CLR 1 ID
3
1) Push ID# (Usually F1, can be changed with the
Function Key setup procedure). The current ID
is displayed.
2) Using the UP or DOWN Scroll key, scroll through
the available ID’s.
The UP key progresses forward through the alphabet. The DOWN key
back steps alphabetically. The ID# Key will also function as the UP
Scroll key.
3) When the desired ID Code appears, push the ENTER
key to select the ID Code. The 3750CS returns
to normal scale operation with the new ID Code
“AARDVARK” (for example) active. Any Tare
value and new totals will be stored in the ID Code
“AARDVARK”.
1) Push ID#. The current ID is displayed.
2) Push the CLR key. The message “CLR 1 ID”
appears.
3) Push ENTER to delete the ID Code. The previous ID
Code is deleted and the next ID Code (alphabetically)
will become active.
Push EXIT instead of ENTER to cancel the ID Code delete.
To Delete an ID Code
Note: This procedure will delete the current ID as displayed on the message line. Recall or scroll to the ID Code you wish to delete using either of the
two methods detailed previously.
To Delete all ID Codes
The following procedure deletes all existing ID Codes and any totals and statistics stored in them.
1
2
CLR 1 ID
3
CLR ALL
4
R U SURE
5
WAIT
1) Push ID# (the Fkey assigned to ID#). The current
ID is displayed.
2) Push the CLR key. The message “CLR 1 ID”
appears.
3) Push the CLR key again. The message “CLR ALL”
appears.
4) Push ENTER to delete all the ID Codes (and Total
& Statistics Registers). The 3750CS double checks
your intent with an “R U SURE” screen.
5) Push ENTER again to complete the Clear function.
It can take a while to clear all the registers. The
3750CS indicates “WAIT” while this is occurring.
Once finished deleting, the 3750CS returns to the
scale mode with the default ID code activated.
