MSI CellScale 3750CS User Manual Download Page 21

Page: 21 / 94

MSI-9000 CellScale

System • 3750CS User Guide Page 21

MEASUREMENT SYSTEMS INTERNATIONAL

Software V1-15 to 1-20

To Enable UNIV TAR (Universal Tare)

NET/GROSS

Switches the display between Net and Gross modes. Net Weight is defined as Gross Weight minus a

Tare Weight.
To Switch Between Net Mode and Gross Mode

Switching back to Gross mode from Net mode will not clear the Tare value. This allows the operator to use the Gross Mode temporarily without having to

reestablish the Tare value. Only manually clearing the Tare or setting a new Tare will change the tare value held before switching into Gross Mode.

OIML Legal-for-trade units only:

The NET/GROSS key is temporary action only. The Gross weight is displayed for 2 seconds and then the display returns

to the Net Mode. The only way to return to permanent Gross readings is to clear the Tare (see Clear Tare procedure).

TAREMODE

TAREALL

DISABLED

ENABLED

TAREALL

1) Push SETUP.

2) Push the TARE switch. The first menu choice

“TAREMODE” appears.

3) Push the UP scroll key to change the menu to

“TAREALL”.

4) Push ENTER. The first selection is the current

TAREALL mode.

5) Push the UP key to change TAREALL to

“ENABLED”.

6) Push ENTER. TAREALL is now enabled and the

3750CS is back in the SETUP TARE menu.

7) Push EXIT to return to normal scale operation (with

the TAREALL function enabled).

1) Starting in the NET weight mode –This example has

a TARE weight equal to 40.5 lb. Push NET/GROSS.

The message will briefly display “GROSS”. All

subsequent readings will be Gross weight until

the NET/GROSS key is pushed again, or until the

TARE is changed.

If working with an ID Code present the ID Name will return to the message

display after the “GROSS” or “NET” message shows.

2) Pushing NET/GROSS again will revert the display

to the NET mode.

Summary of Contents for CellScale 3750CS































































































Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands

MSI CellScale 3750CS, User Manual

Search results

Summary of Contents for CellScale 3750CS

Reviews:

Related manuals for CellScale 3750CS

Brands by name

Popular brands