21
key or the “Normalize” key to adjust the value of concentration factor.
Note: When measuring the same sample, by setting the concentration factor, you may measure
the sample directly. In this case, the PMT level should be in accordance with that of readout of
concentration factor
2.3.3
Shutdown Instrument
Turn off the power source of the Fluorospect rophotometer main unit first, and then the
power source of the xenon lamp. (The order is reverse to that of startup.)
If in on-line mode, close the software first, then turn off the power source of the main unit, and
turn off the Xenon lamp.
Note: After turning off the power source of the xenon lamp, please wait for 60 seconds at least.
Then turn on the xenon lamp if you want to use it once again.
INSTRUCTION MANUAL FOR SPECTRO 96 FLUOROSPECTROPHOTOMETER
