41
7.2
Wavelength Scanning Operation
Fluorescence spectrum can be acquired by wavelength scan, and the wavelength of
fluorescent measurement used for quantitative analysis can be determined from the fluorescence
spectrum.
7.2.1
Parameter Setting
On completion of initialization of the instrument, the interface of wavelength scan appears
immediately. Before scanning operation, you need to set scanning parameters first.
After clicking “Set Parameter” , the interface of “wavelength Scan Parameter “ will appear as
shown in Fig.2-6.
Fig. 2-6 Interface of Wavelength Scan Parameter
1. EM Start. Set the start wavelength of scan.
2. EM End. Set the end wavelength of scan.
3. Y Axis Min. Set the minimum of Y axis in the scan spectrum.
4. Y Axis Max. Set the maximum of Y axis in the scan spectrum.
5. Interval. Set the data interval of wavelength scan.
6. Replicates. Set the number of scans.
7. Scan Speed. Set the scan speed. The value automatically changes with wavelength
interval.
7. Operation of Wavelength Scan Mode (When Connected
with a Computer)
INSTRUCTION MANUAL FOR SPECTRO 96 FLUOROSPECTROPHOTOMETER
