Movement ESTEIRA X 3.0, Instruction Manual

Page: 182 / 288

BELT LUBRICATION
Certain precautions are required for proper operation of the Movement treadmill.
Slipping of the belt on the deck requires the material to be properly lubricated.
To maintain the warranty criteria, Movement uses a self-lubricating material to ensure longer
useful life of the material and deck assembly of your equipment.
Upon the slightest problem with the belt material, contact the Manufacturer or an Authorized Point.
DANGER!
Do not use any type of lubricant on the conveyor belt. The use of lubricant will
damage the equipment, with consequent loss of warranty, in addition to the risk of
serious or fatal damage to the user.
MAINTENANCE
86
INVERTER ERROR TABLE
Before removing the front cover to view the inverter, be sure to
turn off the treadmill. The inverter has codes that can help identify
a problem. Follow the table below with the inverter codes.
(A) ALARM / FAULT (F) DESCRIPTION
A046
High motor load
Motor overload
A050
High temperature in the
power module
High temperature measured by the temperature sensor
(NTC) of the power module.
A084
Self-diagnosis alarm
Relating to the inverter hardware automatic identification
algorithm.
A190
Incline Circuit Fault
Fault in the circuit responsible for incline motor control.
F021
DC Bus undervoltage
Fault: Undervoltage in the intermediate circuit.