Movement ESTEIRA X 3.0, Instruction Manual

Page: 174 / 288

TURNING ON THE TREADMILL
The power cord is located on the front part, under the treadmill.
At the front of the treadmill, there is a light with an switch on/off
function that should be positioned in function whenever the off
treadmill is idle, avoiding accidents due to involuntary activation.
O I
= = n Off O
DANGER!
Never proceed or implement modifications/adaptations in electronic,
electromechanical and/or mechanical adjustment devices. They are designed to
work on the set parameters. Failure to comply with this determination may result in
injury to the user, damage to the equipment, and consequent loss of the Warranty,
in addition to freeing Brudden from any liability for any consequential events.
EMERGENCY CLIP
The emergency clip is a safety device that accompanies the
treadmill. If the sensor loosens from the equipment the treadmill
will stop its movement quickly, and then turn off by itself. To turn
on the treadmill, reconnect the sensor to the treadmill again and
press the Start button to restart the treadmill. Always attach the
emergency clip to the wearer's clothing.
DANGER!
Do not allow third parties to approach the emergency
clip while the treadmill is in use, if the clip is released
from the treadmill suddenly, the user may be thrown
forward due to sudden stoppage.
SPACE
We advise the user to use a minimum
access and escape area as shown on the
right. The access and escape area can be
between the treadmills used.
60 cm
2 m
60 cm 60 cm
OPERATING INSTRUCTION
LOCATION OF THE
SWITCH
60 cm
SENSOR
78