Section 1 - Introduction
The purpose of this manual is to assist users in the integration, operation and
maintenance of an E-Multi Auxiliary Injection Unit. This manual is designed to
cover most system configurations. This manual should be used in conjunction
with
E-Multi Controller User Manual. If you need additional information
specific to your system, or information in another language, please contact
your representative or a
Mold-Masters
office.
1.1 Intended Use
Mold-Masters
’ E-Multi systems have been built to process thermoplastic
material at the required temperature for injection molding and must not be
used for any other purpose. The E-Multi injection unit is to be integrated with
a host injection molding machine and not used as a standalone device. Any
other uses would fall outside the engineered intent of this machine, which
may be a safety hazard and will void any and all warranties.
1.2 Documentation
This manual is part of the documentation package for your order and should
be referenced along with the following documents included in the package:
• The Bill of Materials (BOM). Together with the General Assembly drawing,
the Bill of Materials should be referenced when ordering spare parts.
• General Assembly drawing
• Electrical drawings
• CE declaration of conformity and declaration of incorporation (EU only)
1.3 Release Details
Table 1-1 Release Details
Document Number
Release Date
Version
AIU-UM-EN-00-05-7
May 2019
05-7
1.4 Warranty
For current warranty information please refer to the documents available from
our website:
https://www.milacron.com/mold-masters-warranty/
or contact
your
Mold-Masters
representative.
1.5 Returned Goods Policy
Please do not return any parts to
Mold-Masters
without pre-authorization and
a return authorization number supplied by
Mold-Masters
.
Our policy is one of continuous improvement and we reserve the right to alter
product specifications at any time without giving notice.
1-1
INTRODUCTION
E-Multi User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
