Section 14 - E-Multi Stands
WARNING
Ensure you have fully read “Section 3 - Safety” before using or maintaining
the E-Multi stand.
WARNING - TIP OVER HAZARD
The stands are intended for supporting E-Multi injection units at the
machine when used in the horizontal position. They are not for transporting
the E-Multi injection unit and would be top heavy and present a tip hazard.
The E-Multi injection unit and stand assembly should be moved together by
crane using the proper E-Multi injection unit lift points. See “E-Multi Weight
Specifications” on page 3-20 for lift points.
Do not modify stands to reduce or add height, for example, adding
additional holes or not bolting the upper and lower columns together. Such
changes would impact the stand stability and could result in serious injury
as well as damage to the machine.
14.1 Introduction
E-Multi stands are designed to support the E-Multi injection machines when
used in a horizontal feed orientation.
14.2 Stand Options
E-Multi stands come in two main designs: compact and heavy duty. See the
“Table 14-1 E-Multi Stand Options” on page 14-1 to determine which stand
design can be used for each E-Multi model.
Each design is manufactured in a number of top column, base column and
frame base options to provide a range of minimum and maximum heights.
Your order documentation will indicate your stand type. If you require spare
parts, or to find out more about other stand options, please contact your
Mold-
Masters
representative.
Table 14-1 E-Multi Stand Options
E-Multi Model
EM1
EM2
EM3
EM4
Compact Stand
Yes
Yes
Yes
No
Heavy Duty Stand
No
No
Yes
Yes
Figure 14-1 Compact stand
Figure 14-2 Heavy duty stand
14-1
E-MULTI STANDS
E-Multi User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
