5. Connect the diagnostic computer to a WIFI network with internet access.
To see a list of available networks, click the wireless network icon next to
the clock on the taskbar.
NOTE
The diagnostic computer must be connected to the internet using its
wireless network adapter. The wired connection must be used to connect
to the controller.
Mold-Masters
does not support alternate network
configurations. Connection problems when using alternate configurations
are not covered under warranty and may result in increased support times
and additional costs.
Figure 7-11 Wireless network icon
6. Open a browser and perform a search to verify internet connectivity.
7-10
E-Multi User Manual
SYSTEM SETUP
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
