Moeller Rapid Link, Switching And Installation System, Page: 8 / 162

Contents
01/08 AWB2190-1430GB
4
– Reading diagnostic status through AS-Interface
®
parameter channel 78
– Set plug monitoring as part of Ready message 79
Setting the functions with DIP switches/jumpers 79
– Setting current values (pins 1 to 4) 80
– Configuration overview (pins 5 to 8) 80
– Activate phase reversal switch (pole 7) 81
– Configure external outputs (pole 5 – 6, 8) 81
– Monitoring the lower current limit with RA-MO24V 81
– Diagnostic status through AS-Interface
®
parameter
channel 81
Diagnose and status via LEDs 82
6 Speed controller RA-SP 83
Device overview 83
Key to part numbers 84
Proper use 84
Features of the Speed Control Unit 85
Engineering 85
– Overview of functions, RA-SP 85
– Sensor connection through M12 86
– Accessories (optional) 86
– Selection criteria, RA-SP2… 87
– Selection criteria, RA-SPV… 88
– Design RA-SP 89
Power supply 90
– Network configuration 90
– Mains voltage, mains frequency 90
– Interaction with p.f. correction equipment 90
– Protective devices and cable cross-sections 90
– Protection of persons and domestic animals with
residual-current protective devices 91
– Current peaks 91
– Mains choke 91
– EMC Guidelines 92
– Cable routing 92
– EMC correct mounting and installation 93
Installation 94
– Mounting position 94
– Mounting dimensions 95
– Mounting 95
– Connections 96
– Connecting the power supply
97
– AS-Interface
®
connection 98
– Connecting AS-Interface
®
and 24 V (RA-SP…/C…A) 98
– Connecting sensors (RA-SP2-34…) 98
– Motor connection 99
Device operation 103
– Functions through AS-Interface® 103
– Commissioning the drive 103
– Selector switch 106
– Key-switch 106
Description of functions
107
– Quick stop and interlocked manual mode with
RA-SP-HE… 107
– Quick stop with creep speed with RA-SP-HE… 108
Setting the functions with DIP switches (RA-SP-HE…) 109