Moeller Rapid Link, Switching And Installation System, Page: 7 / 162

01/08 AWB2190-1430GB
Contents
3
– I/O fault messages, internal device faults 56
– Auto configuration for servicing 56
– Key-switches 56
– Reset 56
– Selector switch
56
Description of functions 57
– Phase reversal 57
– Quick stop and interlocked manual mode 57
– Monitoring of lower current limit 59
– Reading diagnostic status through
AS-Interface
®
parameter channel 59
– Set plug monitoring as part of Ready message 60
Setting the functions with DIP switches/jumpers 60
– Setting current values (pins 1 to 4) 62
– Configuration overview (pins 5 to 8) 62
– Activate phase reversal switch (pole 7) 63
– Configure external outputs (pole 5 – 6, 8) 63
– Monitoring of lower current limit 64
– Diagnostic status through AS-Interface
®
parameter
channel 64
Diagnose and status via LEDs 65
5 Motor starter RA-MO (from Version 3.0) 67
Device overview 67
Key to type references 67
Proper use 68
Engineering 68
– Functions overview RA-DIMO 68
– I/O assignment 69
– Sensor connection through M12 69
– Actuator connection through M12 (RA-MO…A…) 69
– Motor cable/motor plug 69
– Selection of short-circuit devices 69
– Cable routing 69
– Accessories 69
Installation
70
– Mounting position 70
– Mounting 70
– Connections 71
– Connecting the power supply 71
– Connecting AS-Interface
®
and 24 V (RA-MO…/C3A) 71
– Connecting sensor and actuator 72
– Motor connection 72
Device operation 74
– Functions through AS-Interface
®
74
– Commissioning the drive 74
– Safety-relevant power-off (RA-MO24V… only) 74
– I/O fault messages, internal device faults 75
– Auto configuration for servicing 75
– Key-switches 75
– Reset 75
– Selector switch
75
Description of functions 76
– Phase reversal 76
– Quick stop and interlocked manual mode 76
– Monitoring of lower current limit 78