MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 97 / 157

7-7
Running Programs
Tip: Recall that convenient and rapid toggling between the Status and Graphs
windows can be achieved by selecting the button in the lower right of the Status
and Graphs windows respectively.
To simultaneously view the status of all blocks including the Block Name, Block
Status, the name of the Program Running, the Time Remaining in the program, the
Time Elapsed, and the User name, select the <View> menu and then <Status All>
from the drop-down list.
If the Block Status indicates that the program was completed with errors, select
<Error Log> from the <View> menu to view error messages.
To view a run log including the date and time that a program was initiated by a
user, select <Cycler Log> from the <View> menu.
Terminating a Run
To terminate a run prior to completion, select the appropriate block from the block selection
menu in the Status window and select <Stop>. Alternatively, select the <Command> menu in
the Status window, and then select <Stop> and either <All> to terminate all programs run-
ning on all blocks, or select the desired block from the drop-down list.
Pausing/Resuming a Run
To merely pause a run, select the appropriate block from the block selection menu in the
Status window and select <Pause>. Alternatively, select the <Command> menu in the Status
window, and then select <Pause/Resume> and either <Pause All> to pause all programs
running on all blocks, or select the desired block from the drop-down list.