manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 101 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 101

DNA Engine Dyad Operations Manual

8-2

In previous chapters, you’ve learned how to install and operate the Dyad cycler, as well as
write and execute programs. In this chapter, the various functions of the <Utilities> submenu
will be discussed. The <Utilities> submenu rounds out the capabilities of the Dyad cycler,
providing access to user name control, remote command mode, and the date and time
settings.

The <Utilities> submenu is selectable from the Status window.

Here is a review of the available submenus.

<About>

When this item is selected, a screen like the following will appear:

This screen indicates the Dyad system software version. The software version information on
this screen can be used to determine if an update is necessary.

Select <OK> to exit from this screen.

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments