manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 93 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 93

7-3

Running Programs

• Select the Temperature field and enter the desired temperature.

• Select Heated Lid if you are incubating at a high temperature and

wish to minimize condensation (refer to the “Sealing with the Hot
Bonnet Lid” section in Chapter 4 for additional information on us-
ing the heated lid).

• Select the desired block(s).

• Select <OK>.

The block(s) will now incubate at the desired temperature.

The Status window will display the status of the selected block. Use the block selection menu
to select a block.

To stop the incubation, select the appropriate sample block from the block selection menu.
Select <Stop> at the bottom of the window. A confirmation window will appear asking you to
verify termination of the instant incubation. Select <Yes> to stop the incubation or <No> to
continue.

Block selection menu

Block status line

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments