manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 95 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 95

7-5

Running Programs

You are now presented with the Run Program window.

The Run Program window

The Run Program window allows you to select the Block(s) that you wish to run your protocol
on. You can select a single block or all blocks (based on block compatibility with your
program).

If you are preparing to run a program using calculated temperature control, selecting <OK>
will display a Select Calculated Mode Parameters window that is appropriate for the type of
program and Alpha unit that you are using. Parameters entered here will allow precise
temperature calculations by the Dyad cycler for your specific protocol and Alpha unit.

For example, for a 96-well Alpha unit, the following selection window will appear:

• Enter the reaction volume of your samples and select the type of reaction

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments