manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 103 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 103

DNA Engine Dyad Operations Manual

8-4

<Remote>

To operate a Dyad cycler in remote mode (i.e., from a desktop computer), select <Remote>
from the <Utilities> menu. The Remote Mode window will appear on the screen.

The only option available is a check box for enabling syntax checking. This will filter out any
commands that do not conform to the PTC Remote Command Set syntax. Attach a null
modem serial interface cable (MJR#02371 or equivalent) to the RS-232 port connector on
the back of the Dyad cycler. Connect to either COMM1 or COMM2 on a PC, or the serial
port on a Mac. The Dyad cycler is now ready to be run in remote mode.

Important!

  

Do not exit remote mode while a protocol is running! If a protocol is loaded

and run remotely, ending the remote session by exiting the Remote Mode window will cancel
this protocol. A confirmation screen will ask you to confirm your intent to exit the Remote
Mode window.

Log on to www.mjr.com for the latest syntax of the remote command set.

<Auto Remote>

Select <Auto Remote> from the <Utilities> menu to direct the Dyad cycler to automatically
enter remote mode upon subsequent power up. This feature is particularly useful if you
consistently control the Dyad cycler using a desktop computer. It eliminates the need to select
<Remote> from the <Utilities> menu after every power up.

To disable the auto remote feature, first select <Exit> to exit remote mode (see the warning in
the <Remote> section above). The cycler will return to the standard operation mode, and the
Status window will be displayed. Select <Auto Remote> from the <Utilities> menu such that
a check mark no longer appears in front of the Auto Remote option. The cycler will now
power up in standard operation mode.

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments