manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 94 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 94

7-4

DNA Engine Dyad Operations Manual

Running Programs

Note:

  The Operations Chapter (Chapter 4) provides information on running programs with

respect to the operation and use of Alpha units. For example, a program containing a
gradient step will only run in 96-well Alpha units. Please review this chapter for additional
technical detail, to ensure that the program you load and run is an appropriate match for
your Alpha units.

To run a program displayed in either the advanced programming window or the graphical
programming window, select <Save+Run>. Recall that prior to running a newly created

graphical program, the program must be assigned a name other than the default name,
“TEMPLATE”, by performing a save as. 

Graphical programs with the default name,

“TEMPLATE”, can not be run.

The Run Program window will appear allowing you to specify the block on which the proto-
col should be run, and the calculated control parameters for the run (if applicable) as de-
scribed below.

To run previously created programs (see Creating Programs, Chapter 5 and Managing and
Editing Programs, Chapter 6), you must first load them into memory.

From the Status window,

• Select <Run> at the bottom of the window or from the <Command>

menu.

• From the open program window that appears, select the desired

Folder and Program.

Double check the program listing to ensure that the listed steps are consistent with
the desired program.

• Select <OK>.

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments