manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 53

5-15

Creating Programs

The 

Program Display box will list steps for the program currently running on the selected

block.

The menu bar at the top of the Status window includes five submenus: <Programs>, <Com-
mand>, <Tools>, <View>, and <Utilities>. These submenus provide the operator with paths
for maneuvering through the various Dyad software windows. For the purposes of this chap-
ter, we will be primarily concerned with the <Programs> submenu. The other submenus will
be covered in Chapters 7 and 8.

Entering a Program Using Graphical Mode

After creation of the initial program, entering a program in graphical mode essentially in-
volves editing the graphically displayed TEMPLATE program. The TEMPLATE program will be
the last, graphical program that was saved. In this section, we will address both creating an
initial graphical program and editing a preexisting template.

• Select <Programs>.

Note: 

As described earlier, this involves positioning the screen cursor over <Pro-

grams> with a fingertip on the touch pad and tapping the touch pad once.

Drop-down submenus appear, including <Open>, <New>, <Copy>, <Move>,
<Delete>, <Delete Folder>, and <New Folder>.

• Select <New>.

An additional menu appears allowing you to choose <Advanced Mode> or <Ba-
sic Mode>.

• Select <Basic Mode>.

The graphical programming window appears displaying no program steps or the
last, saved program. In either case, the new program bears the default name,
TEMPLATE.

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands