manualshive.com logo in svg

MJ Research DNA Engine Dyad PTC-220, Operation Manual, Page: 82 / 157

Share
Download
MJ Research DNA Engine Dyad PTC-220 Operation Manual Download Page 82

6-4

DNA Engine Dyad Operations Manual

Opening a Program in Basic Mode

You can choose to open and edit a graphical program in either the graphical programming
window, or in the advanced programming window. Opening a graphical program in ad-
vanced mode is desirable if you wish to add step modification options, incubations below
0

°

C, or other programming features not available in graphical programs (see the “Types of

Programs” section in Chapter 5 for a listing of available program features). However, once
advanced-only features are added to a graphical program, the program can no longer be
opened or edited in basic mode.

We will open our example graphical program, GRAPH#1, in basic mode. The procedure is
similar to that described above for opening a program in advanced mode and is summa-
rized here.

• Select <Programs>.

• Select <Open>.

• Select <Basic Mode>.

The open program window will appear.

• Select the folder FOLDER1.

• Select the program GRAPH#1.

• Select <OK>.

GRAPH#1 will be displayed in the graphical programming window.

Editing a Program

Recall our general program.

Temperature Control Mode: Calculated

Lid Control Mode: Constant at 100

°

C

1.  Incubate at 94

°

C for 00:01:00

Beep on Target (advanced only)

2.  Incubate at 92

°

C for 00:00:30

Beep on Target (advanced only)

3.  Gradient from 45

°

C to 65

°

C for 00:03:00

4.  Cycle to step 2 for 29 more times.

5.  Incubate at 10

°

C forever

End

Summary of Contents for DNA Engine Dyad PTC-220






























































































































































Reviews:

No comments