Mitsubishi FX2N-32DP-IF, User Manual

Page: 41 / 198

FX2N-32DP-IF Profibus-DP Interface Unit Wiring 3
3-3
3.2 Power Supply
Further information for the extension unit’s wiring can be found in the FX
2N
Series Hardware
Manual. Further information for special function units/blocks can be found in their respective
manual. For wiring of grounding, refer to Section 3.3.
3.2.1 AC Power Supply Type: FX
2N
-32DP-IF
When wiring a 32DP-IF and extension I/O units/blocks, the connection method is identical to
an FX
2N
series PLC. Further information can be found in the FX
2N
-32DP-ID User’s Manual and
FX
2N
Series Hardware Manual.
• Supply both FX
2N
-32DP-IF-D and extension I/O units from the same AC power source.
• Connect “COM” terminal on the 32DP-IF to the “0V” terminal on the extension unit.
• For ground wiring, refer to Section 3.3.
Figure 3.7: AC Power Supply Type: FX
2N
-32DP-IF
*1 Magnetic contact safety circuit
100~
240V AC
L
N
MC
*1
Start
MC
Emegency
stop
MC MC
COM
24+
L
N
S/S
X000
X001
L
N
0V
24+
S/S
COM1
Y000
Y001
S/S
COM1
Y

0
Y

1
Extension
I/O Block
(Relay Output
-Refer to
Section3.5-)
Extension
I/O Block
(Source Input
-Refer to
Section3.4-)
Extension
I/O Unit
<AC Power
Supply Type>
(Source Input
-Refer to
Section3.4-)
Extension
I/O Block
(Source Input
-Refer to
Section3.4-)
FX
2N
-32DP-IF
Power supply for AC loads
Switch
Switch
Fuse
Grounding
Ref. Section3.3
Service
Supply
Service
Supply
Switch
X 0
X 1
X 1
X 0