Mitsubishi FX2N-32DP-IF, User Manual

Page: 23 / 198

FX2N-32DP-IF Profibus-DP Interface Unit Introduction 1
1-11
Note:
*1 These extension I/O units can connect to FX
2N
-32DP-IF (AC power supply type).
They cannot connect to FX
2N
-32DP-IF-D (DC power supply type).
*2 This extension I/O unit can connect to FX
2N
-32DP-IF-D (DC power supply type).
It cannot connect to FX
2N
-32DP-IF (DC power supply type).
*3 These extension I/O units can connect to FX
2N
-32DP-IF-D (DC power supply type).
They cannot connect to FX
2N
-32DP-IF (AC power supply type).
*4 When connecting FX
2N
-32DP-IF or extension I/O unit of AC power supply type (marked
“*1” module), those extension input blocks should be supplied from the FX
2N
-32DP-IF or
extension I/O unit (marked “*1” module).
However, when connecting FX
2N
-32DP-IF-D or extension I/O unit of DC power supply
type (marked “*3” module), those extension input blocks should be supplied from same
external DC power source as the FX
2N
-32DP-IF-D or extension I/O unit (marked “*3”
module).
*5 FX
0N
-8ER has 4 DC inputs and 4 Relay outputs. However, this block is counted 8 inputs
and 8 outputs when counting total I/O points.
*6 This value = 8 + 8
×
(number of active slave)
*7 FX
2N
-10PG’s power consumption for the following terminals is shown below.
*8 An external 24 V DC power supply is not necessary. However, the external power
consumption is 70mA from the AS-interface power supply.
Table 1.8: FX2N-10PG’s Power Consumption from Extension Power Supply
Terminals Power Consumption
START
≤
32 mA / 24V DC DOG
X0, X1
PG0
≤
20 mA / 3 to 5V DC
VIN
5V DC
≤
100 mA
24V DC
≤
70 mA