Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 39 / 618

Locking and unlocking
1-17
1
NOTE
●
If you pull on the door handle too quickly, it may not
unlock. In this case, grip the handle again, check that the
doors and tailgate have been unlocked, and then pull on
the handle.
●
If the door handle is exposed to a large quantity of water,
for example during strong rainfall or in a car wash while
the KOS key is within the operating range of the exterior
transmitter, the keyless operation system may be triggered
and the vehicle will be unlocked. If this happens, the vehi-
cle is automatically locked again after about 30 seconds.
On vehicles with the Mitsubishi Multi-Communication
System (MMCS), this function can be customised via the
display. Refer to the separate owner’s manual for details.
Confirmation function for locking and unlocking
The system operation can be confirmed as shown below. How-
ever, the room lamp will only illuminate if the room lamp
switch is in the middle position.
NOTE
●
This function can be modified as stated below. For further
information, please contact your MITSUBISHI MOTORS
Authorised Service Point.
• Enable the confirmation function (flashing of the turn-
signal lamps) only when the vehicle is locked or
unlocked.
• Disable the operation confirmation function (flashing of
turn-signal lamps).
• Change the number of flashes (flashing of turn-signal
lamps) for the operation confirmation function.
When locking: The turn-signal lamps blink once.
When unlocking: The room lamp illuminates for about 15 sec-
onds and the turn-signal lamps blink twice.