Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 327 / 618

Starting and driving
4-85
4
NOTE
●
It is possible to set the display language of the screen to
English, Spanish, French, German, Italian, Swedish,
Dutch, Danish or Portuguese.
For details, please refer to the separated owner’s manual
for “Mitsubishi Multi Communication System (MMCS)”.
●
When the vehicle is tilting because of the number of peo-
ple in the vehicle, the weight and positioning of luggage,
and/or the condition of the road surface, the lines in the
view from the rear-view camera may not be accurately
positioned relative to the actual road.
●
The lines in the view from the rear-view camera are based
on a level, flat road surface. Do not use them as a guide to
distances to solid objects.
●
Because the rear-view camera has a special lens, the lines
on the ground between parking spaces may not look paral-
lel on the screen.
●
In the following situations, the screen indication may be
difficult to see. There is no abnormality.
• Low light (nighttime)
• When the light of the sun or the light from a vehicle’s
headlamps shines directly into the lens
→
When an extremely bright spot is shown on the
screen, colour smearing* (a characteristic of CCD cam-
eras) can occur.
●
Colour smearing: When an extremely bright spot (for
example, sunlight that has reflected off the bumper) is
shown on the screen, it appears to leave a vertical trail.
●
If the camera is hot and is then cooled by rain or a car
wash, the lens can mist up. This phenomenon does not
indicate a malfunction.
●
It is not possible to fully see obstacles when the lens is
dirty. If the lens becomes contaminated by water droplets,
snow, mud, or oil, wipe off the contamination, taking care
not to scratch the lens.
●
Please observe the following cautions. Ignoring them
could lead to a camera malfunction.
• Do not subject the camera to physical shock.
• Do not apply wax to the camera.
• Do not splash the camera with boiling water.
• Do not disassemble the camera.