Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 379 / 618

For pleasant driving
5-45
5
To listen to the radio
E00709000548
1. Press the PWR switch (1) or the AM/FM button (2) to turn
ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button (2) to select the desired band.
3. Turn the TUNE switch (4), or press the SEEK button (5 or
6) or memory select buttons (3) to tune into a radio broad-
casting station.
To tune the radio
E00709100422
Automatic tuning
After pressing the SEEK button (5 or 6), a receivable station
will be automatically selected and reception of the station will
begin.
Manual tuning
The frequency changes every time the TUNE switch (4) is
turned. Turn the switch to select the desired radio broadcasting
station.
To enter frequencies into the memory
E00716100844
Manual setting
For the memory select buttons (3), you can assign a maximum
of 18 stations in the FM band (6 FM1, 6 FM2 and 6 FM3 sta-
tions) and 6 stations each in the MW and LW band. (Stations
already assigned to the memory select buttons are replaced by
any newly assigned stations.)
Follow the steps described below.
1. Press the SEEK button (5 or 6), or turn the TUNE switch
(4) to tune to the frequency you want to register to in the
memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer.
The sound will be momentarily interrupted while the fre-
quency is entered into the memory. The number of the
button matching the entry in the memory as well as the
frequency is displayed.
3. The preset memory setting is retrieved by pressing the
button and releasing it within 1 seconds.
NOTE
●
Disconnecting the battery terminal erases all the radio fre-
quencies stored in the memory.