Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 347 / 618

For pleasant driving
5-13
5
The outlet port (except “ ”), recirculation/outside air selec-
tion and blower speed, as well as ON/OFF of air conditioning
will be controlled automatically.
To stop the system, turn the blower speed selection dial to the
“OFF” position.
NOTE
● While the engine coolant temperature is low, the tempera-
ture of the air from the heater will be cool/cold until the
engine warms up, even if you have selected warm air with
the dial. To prevent the windscreen and windows from
fogging up, the ventilator mode will be changed to “
”
and the blower speed will be reduced.
●
If the blower speed selection dial, air conditioning switch,
mode selection dial, or air selection switch is operated
while the system is operating in the AUTO mode, the acti-
vated function overrides the corresponding function of
automatic control. All other functions remain under auto-
matic control.
Operating the system in manual air mode
E00704200167
Blower speed and ventilator mode may be controlled manually
by setting the blower speed selection dial and the mode selec-
tion dial to the desired positions. To return to automatic opera-
tion, set the dials to the “AUTO” position.
Demisting of the windscreen and door windows
E00704300373
Use the mode selection dial (“ ” or “ ”) to remove frost or
mist from the windscreen or door windows.
CAUTION
!
●
When using the air conditioning, the idling speed
may increase slightly as the air conditioning com-
pressor is switched on/off automatically. While a
vehicle with an A/T or CVT is stationary, fully
depress the brake pedal to prevent the vehicle from
creeping.
CAUTION
!
● For safety, make sure you have a clear view through
all the windows.