Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 96 / 618

2-10
Seat and seat belts
2
Seat heaters
E00401100380
The seat heaters can only be operated with the ignition switch
in the “ON” position. The indicator lamp (A) will illuminate
while the heater is on.
1- Heater high (for quick heating).
2- Heater off.
3- Heater low (to keep the seat warm).
CAUTION
!
●
Switch off the seat heaters when not in use.
● Operate in the high position for quick heating. Once
the seat is warm, set the heater to low to keep it
warm. Slight variations in seat temperature may be
felt while using the seat heaters. This is caused by
the operation of the heater’s internal thermostat and
does not indicate a malfunction.
● If the following types of persons use the heated seats,
they might become too hot or receive minor burns
(red skin, heat blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol or sleep-
inducing medication (cold medicine, etc.)
● Do not place heavy objects on the seat or stick pins,
needles or other pointed objects into it.
● Do not use a blanket, cushion or other material with
high heat-insulation properties on the seat while
using the heater as this might cause the heater ele-
ment to overheat.
● Do not use benzene, petrol, alcohol or other organic
solvents for cleaning the seats. Otherwise, there is a
risk of damage not only to the seat cover, but also to
the heater element.
● If water or any other liquid is spilled on the seat,
allow it to dry thoroughly before attempting to use
the heater.
●
Turn the heater off immediately if it appears to be
malfunctioning during use.