Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 54 / 618

1-32
Locking and unlocking
1
3. Insert the emergency key into the ignition switch, and turn
it while pushing.
NOTE
●
If the ignition switch will not turn from the “LOCK” to
the “ACC” position, slightly turn the steering wheel right
and left while turning the ignition switch.
When turning from “ACC” to “LOCK”
1. [Vehicles with M/T]
While pushing the ignition switch, turn it to the “LOCK”
position and pull out the key.
[Vehicles with A/T or CVT]
First, set the selector lever to the “P” (PARK) position,
and turn the emergency key to the “ACC” position. Then
turn it to “LOCK” position while pushing it. You can pull
it out in the 'LOCK' position.
2. Install the ignition switch cover.
3. Reinsert the emergency key into the KOS key.
NOTE
●
On vehicles with A/T or CVT, the emergency key with
KOS key cannot be removed unless the selector lever is
set to the “P” (PARK) position.
●
When not using the emergency key, always install the
ignition switch cover. Otherwise, there is a risk of dirt or
dust getting into the keyhole of the ignition switch and
causing a malfunction.
CAUTION
!
● Do not remove the emergency key from the ignition
switch while driving. The steering wheel will lock,
causing loss of control.
●
If the engine is stopped while driving, the brake ser-
vomechanism will cease to function and braking
efficiency will deteriorate. Furthermore, the power
steering system will not function and it will require
greater manual effort to operate the steering.