1-20
Locking and unlocking
1
When turning from “LOCK” (PUSH OFF) to “ACC”
E00306600015
Push the ignition switch and then turn it slowly.
NOTE
●
If the ignition switch does not turn from “LOCK” (PUSH
OFF) to “ACC”, press the ignition switch again, lightly
move the steering wheel left and right, and then turn the
ignition switch.
●
The ignition switch cannot be turned if the keyless opera-
tion key is not in the vehicle.
Refer to “Operating range for starting the engine” on page
1-13.
When turning from “ACC” to “LOCK”
E00306700032
[Vehicles with M/T]
Put the gearshift lever into the “N” (Neutral) position, and
slowly turn the ignition switch to the “LOCK” position while
pressing it.
[Vehicles with A/T or CVT]
First, set the selector lever to the “P” (PARK) position, and
then slowly turn the ignition switch to the “LOCK” position
while pressing it.
NOTE
●
On vehicles with A/T or CVT, the ignition switch cannot
be turned to the “LOCK” position unless the selector lever
is in the “P” (PARK) position.
A- Steering wheel locked
B- Steering wheel released
Summary of Contents for Outlander 2007
