Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 429 / 618

For pleasant driving
5-95
5
Emergency calls
E00729300039
You can make quick calls to “112” in the event of an emer-
gency. The simple process to call “112” is described below.
1. Press the SPEECH button.
2. Say “Emergency.”
The Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition will automatically dial “112”.
At this time, the system will confirm whether it should
call “112”. Answer “Yes” if it is ok to call “112.”
If you answer “No”, the voice recognition mode will be
deactivated without making the call.
NOTE
●
Depending on the region (country) in which the call is
made, emergency calls may not go through.
SEND function
E00729400043
During a call, press the SPEECH button to enter voice recogni-
tion mode, then say “<numbers> SEND” to generate DTMF
tones.
For example, if you need to simulate the press of a phone but-
ton as a response to an automated system’s prompting, press
the SPEECH button and say “1 2 3 4 pound SEND”. The sys-
tem will send the signals for 1234# via your cellular phone.
Switching between hands-free mode and private
mode
E00730900019
The Hands-free Bluetooth
®
cellular phone interface system
with voice recognition can switch between Hands-free mode
(Hands-free calls) and private mode (calls using cellular
phone).
If you press the SPEECH button and say “Transfer call” during
a Hands-free call, you can stop the Hands-free mode and talk in
private mode.
To return to Hands-free mode, press the SPEECH button again
and say “Transfer call”.
Receiving calls
E00729600016
If an incoming phone call is received while the ignition switch
is in the “ACC” or “ON” position, the audio system will be
automatically turned on and Incoming Call, even when the
audio system was originally off.
The phone ring sound will be output from the front passenger’s
seat speaker.
If the CD player or radio was playing when the incoming call
was received, the audio system will mute the sound from the
CD player or radio and output only the Incoming Call.
To receive the call, press the PICK-UP button on the steering
wheel control switch.
When the call is over, the audio system will return to it’s previ-
ous state.