Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 60 / 618

1-38
Locking and unlocking
1
NOTE
●
If the engine is cold, the diesel preheat indicator lamp will
stay on for a longer time.
●
When the engine has not been started within about 5 sec-
onds after the diesel preheat indicator lamp went out,
return the ignition switch to the “LOCK” position. Then
turn the key to the “ON” position to preheat the engine
again.
●
When the engine is warm, the diesel preheat indicator
lamp will not come on when the ignition switch is turned
to the “ON” position.
Start the engine by turning the ignition switch directly to
the “START” position.
9. Turn the emergency key with the KOS key to the
“START” position without depressing the accelerator
pedal and release it when the engine starts.
10. Remove the KOS key from the emergency key.
NOTE
●
A ticking noise may be heard after the engine has started.
This is not an abnormal condition. The noise will disap-
pear after the engine has run for a short time.
If the ticking noise continues after the engine is warmed
up, please contact your MITSUBISHI MOTORS Author-
ised Service Point.
Keyless entry system
E00307700127
Press the corresponding remote control switch on the key and
all doors as well as the tailgate will lock or unlock. These
remote control switches can also operator the door mirrors and
electric windows.
1- LOCK ( ) switch
2- UNLOCK ( ) switch
3- Indicator lamp