Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 427 / 618

For pleasant driving
5-93
5
7. When the phone deletion process is completed, the voice
guide will say “Deleted.” The system will then beep and
the voice recognition mode will be deactivated.
If the phone deletion process fails for some reason, the
voice guide will say “Delete failed.” The system will then
beep and the voice recognition mode will be deactivated.
Repeat the procedure from Step 1.
To make a call
E00728900012
To use the Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition to make a call, a Bluetooth
®
cellu-
lar phones with Hands-free Profile must be paired to the
system. If a cellular phone has not been paired to the system,
do so in accordance with the instructions provided in “Pairing a
cellular phone” on page 5-89.
Making a call by using the telephone number
E00729000036
You can make a call by saying the telephone number.
1. Press the SPEECH button.
2. Say “Dial.”
3. After the voice guide says “Number Please,” say the tele-
phone number.
The Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition will then make the call.
When the confirmation function is on, the system will
confirm the telephone number again. To continue with
that number, answer “Yes.”
To change the telephone number, answer “No” and then
say the telephone number again.
NOTE
●
For English, the system will recognise both “zero” and
“oh (Letter “o”) for the number “0.” Refer to “Commands
and Alternatives” on page 5-103 for details.
●
The Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition supports local phone numbers
with a minimum of 3 digits to a maximum of 10 digits. A
maximum of 11 digits is possible when the first digit is 0.
International numbers starting with 00 can have a maxi-
mum of 19 digits. Service call numbers that start with * or
# are supported with up to 5 digits after the * or #. 0 is an
acceptable number for operator assistance.
All other numbers will not be sent through the Hands-free
System but may be dialed directly from the phone.
Making a call by saying a name in the system
phonebook
E00729100011
You can make a call by saying a name that has been registered
in the phonebook for the Hands-free Bluetooth
®
cellular phone
interface system with voice recognition.
For more information on the phonebook, refer to “Phonebook
function” on page 5-96.
1. Press the SPEECH button.
2. Say “Call.”
3. After the voice guide says “Name Please,” say the name
of the person that you want to call that is registered in the
phonebook.