Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 356 / 618

5-22
For pleasant driving
5
Automatic setting
Via this method, all manually set stations in the band currently
selected for reception are replaced with stations in the same
band that are automatically selected in order of signal strength.
The radio automatically selects 6 stations in the FM band (FM3
stations only) and 6 stations each in the MW and LW band.
Follow the steps described below.
1. With radio mode selected, hold down the AM/FM button
(2) for 2 seconds or longer. The 6 stations with the best
signal strength will automatically be assigned to the mem-
ory select buttons (3), with the lowest-frequency station
being assigned to the lowest-number button.
2. When you subsequently press a memory select button to
select a channel number, the radio will begin receiving the
station assigned to that number.
NOTE
●
If you press the AM/FM button (2) for 2 seconds or longer
while tuning to the FM1 or FM2 band, the radio will auto-
matically switch to the FM3 band, where the automatic
seeking/storing function will be activated.