Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 296 / 618

4-54
Starting and driving
4
NOTE
●
Avoid sudden braking, sudden acceleration and sharp
turning; such operations could result in the vehicle
becoming stuck.
●
If the vehicle becomes stuck in sandy or muddy roads, it
can often be moved with a rocking motion. Move the
gearshift lever or selector lever alternately between the 1st
and “R” (Reverse) positions (with M/T), the “D”
(DRIVE) and “R” (REVERSE) positions (with A/T or
CVT), while pressing lightly on the accelerator pedal.
●
Driving on rough road can cause rust on the vehicle; wash
the vehicle thoroughly as soon as possible after such use.
Climbing/descending sharp grades
Your vehicle may not provide sufficient hill climbing ability
and engine braking on steep slope. Avoid driving on steep
slopes even though the vehicle is an 4-wheel drive vehicle.
Driving through water
E00618900034
If the electrical circuits become wet, further operation of the
vehicle will be impossible; therefore, avoid driving through
water unless absolutely necessary. If driving through water is
unavoidable, use the following procedure:
Check the depth of the water and the terrain before attempting
to drive through it. Drive slowly to avoid creating excessive
water splashing.
CAUTION
!
●
Never drive through water that is deep enough to
cover wheel hubs, axles or exhaust pipe. Do not
change the gearshift lever position (M/T) or the
selector lever position (A/T or CVT) while driving
through water.
Frequent driving through water can adversely affect
the life span of the vehicle; consult we recommend
you to take the necessary measures to prepare,
inspect, and repair the vehicle.
●
After driving through water, apply the brakes to be
sure they are functioning properly. If the brakes are
wet and not functioning properly, dry them out by
driving slowly while lightly depressing the brake
pedal. Inspect each part of the vehicle carefully.