Mitsubishi MOTORS Outlander 2007, Owner'S Manual

Page: 222 / 618

3-62
Instruments and controls
3
●
If the lamps do not turn on or off with the switch in the
“AUTO” position, operate the switch manually. We rec-
ommend you have your vehicle checked.
Vehicles with Daytime Running Lamp*
When the engine is running while the ignition switch is in the
“ON” position and the lamp switch is set to 'AUTO' or “OFF”,
the low beam of the headlamps, the tail lamps, etc., will illumi-
nate.
Lamp automatic cut-out function
(headlamps, fog lamp, etc.)
●
If the ignition switch is turned to the “LOCK” or “ACC”
position or the key is removed from the ignition switch,
while the lamp switch is in the “
” position, the lamps
automatically go out when the driver’s door is opened.
[When the engine was started using the key]
• If the key is removed and the driver’s door is opened, a
high-pitched buzzer will sound intermittently to remind
the driver to turn off the lamps.
[When the engine was started by keyless operation
function]
• If the ignition switch is turned to the “LOCK” (PUSH
OFF) position and the driver’s door is opened, a high-
pitched buzzer will sound intermittently to remind the
driver to turn off the lamps.
●
If the ignition switch is turned to the “LOCK” position or
“ACC” position, or the key is removed from the ignition
switch, while the lamp switch is in the “
” position, the
lamps will remain on for about 3 minutes after the driver’s
door has been shut and then turn off automatically.