manualshive.com logo in svg

Mitsubishi Electric Melservo MR-J5 G Series, User Manual

The Mitsubishi Electric Melservo MR-J5 G Series offers exceptional performance and precision control in motion control applications. To assist users in harnessing its full potential, we provide a comprehensive and user-friendly User Manual that can be effortlessly downloaded for free from our website. Experience absolute proficiency with ease, courtesy of the MR-J5 G Series User Manual, available exclusively at manualshive.com.

Share
Download
background image

6  FUNCTIONAL SAFETY

6.4  Safety sub-function

351

6

*1 When using a Mitsubishi Electric safety programmable controller, use the safety output device "SA¥Y". For details on the safety device, 

refer to the following manual.

MELSEC iQ-R CPU Module User's Manual (Application)

 • Feedback of various function outputs via a network
STOS (STO output), SOSS (SOS output), SSMS (SSM output), etc., can be transmitted through the network.

Servo amplifier to Master station 

*1

Bit

Function output

Description

0

STOS (STO output)

0: Indicates that the STO status has been canceled.
1: Indicates that the STO function is activated and the energy supply has been shut off.

1

SSMS (SSM output)

0: Indicates that the servo motor speed exceeds the set SSM speed.
(Off when the SSM function is disabled.) 1: Indicates that the servo motor speed is equal to or less 
than the set SSM speed.

2

Not used

3

SOSS (SOS output)

0: Indicates that the SOS function is not activated.
1: Indicates that the SOS function is activated by the SS2 function.

4

Not used

5

SDIPS (SDIP output)

0: Indicates that the SDIP function is not activated.
1: Indicates that the SDIP function is activated.

6

SDINS (SDIN output)

0: Indicates that the SDIN function is not activated.
1: Indicates that the SDIN function is activated.

7

SNERR (Safety communication error 1)

0: Indicates that no error related to safety communication is occurring.
1: Indicates that an error related to safety communication is occurring.

8

SLS1S (SLS1 output)

0: Indicates that the SLS1 function is not activated.
1: Indicates that the SLS1 function is activated.

9

SLS2S (SLS2 output)

0: Indicates that the SLS2 function is not activated.
1: Indicates that the SLS2 function is activated.

10

SLS3S (SLS3 output)

0: Indicates that the SLS3 function is not activated.
1: Indicates that the SLS3 function is activated.

11

SLS4S (SLS4 output)

0: Indicates that the SLS4 function is not activated.
1: Indicates that the SLS4 function is activated.

12

SS1S (SS1 output)

0: Indicates that the SS1 function is not activated.
1: Indicates that the SS1 function is activated.

13

SS2S (SS2 output)

0: Indicates that the SS2 function is not activated.
1: Indicates that the SS2 function is activated.

14

SLIS (SLI output)

0: Indicates that the SLI function is not activated.
1: Indicates that the SLI function is activated.

15

Not used

16

17

SNERR2 (Safety communication error 2)

0: Indicates that the command signal for a safety sub-function that is disabled in [Pr. PSA02 
Functional safety setting] is not input.
1: Indicates that the command signal for a safety sub-function that is not used is input.

18

SBCS (SBC output)

0: Indicates that the STO status has been canceled and the energy supply to the electromagnetic 
brake has not been shut off.
1: Indicates that the STO function is activated and the energy supply to the electromagnetic brake 
has been shut off.

19

Not used

20

21

22

23

24

SLT1S (SLT1 output)

0: Indicates that the SLT1 function is not activated.
1: Indicates that the SLT1 function is activated.

25

SLT2S (SLT2 output)

0: Indicates that the SLT2 function is not activated.
1: Indicates that the SLT2 function is activated.

26

SLT3S (SLT3 output)

0: Indicates that the SLT3 function is not activated.
1: Indicates that the SLT3 function is activated.

27

SLT4S (SLT4 output)

0: Indicates that the SLT4 function is not activated.
1: Indicates that the SLT4 function is activated.

Summary of Contents for Melservo MR-J5 G Series



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Melservo MR-J5 G Series

D.A.S. EP Series User Manual preview
EP Series
Brand: D.A.S. Pages: 15
Larcan MX Series Technical Manual preview
MX Series
Brand: Larcan Pages: 13
Sansui AU-7700 Operating Instructions Manual preview
AU-7700
Brand: Sansui Pages: 28
Technics SU-Z65 - SERVICE Service Manual preview
SU-Z65 - SERVICE
Brand: Technics Pages: 20
imaage dynamics Q1200.1 Owner'S Manual preview
Q1200.1
Brand: imaage dynamics Pages: 9
Xtant 1.1I Owner'S Manual preview
1.1I
Brand: Xtant Pages: 19
Absolute Measurement L-ANV-0-0-R-AC Instruction Manual preview
L-ANV-0-0-R-AC
Brand: Absolute Measurement Pages: 10
DaytonAudio DTA30HP User Manual preview
DTA30HP
Brand: DaytonAudio Pages: 4
Radio Systems GEN-DD A/WC Manual preview
GEN-DD A/WC
Brand: Radio Systems Pages: 13
Audiolab DQX-7200 User Manual preview
DQX-7200
Brand: Audiolab Pages: 34
Boston GT-5750 Owner'S Manual preview
GT-5750
Brand: Boston Pages: 12
Eden Solo CXC-300 Owner'S Manual preview
Solo CXC-300
Brand: Eden Pages: 7
Sound Choice 801M Operation Manual preview
801M
Brand: Sound Choice Pages: 16
Optimus UP-1000U3 Installation And Operating Instructions Manual preview
UP-1000U3
Brand: Optimus Pages: 19
ALLNIC AUDIO M-3000 MK2 Owner'S Manual preview
M-3000 MK2
Brand: ALLNIC AUDIO Pages: 9
Lightning Audio LA-21 00 Manual preview
LA-21 00
Brand: Lightning Audio Pages: 4
STAX SRM-006tS User Manual preview
SRM-006tS
Brand: STAX Pages: 8
Kramer 105VB Technical Specifications preview
105VB
Brand: Kramer Pages: 1

Brands by name

Popular brands

Load more brands