manualshive.com logo in svg

Mitsubishi Electric Melservo MR-J5 G Series, User Manual

The Mitsubishi Electric Melservo MR-J5 G Series offers exceptional performance and precision control in motion control applications. To assist users in harnessing its full potential, we provide a comprehensive and user-friendly User Manual that can be effortlessly downloaded for free from our website. Experience absolute proficiency with ease, courtesy of the MR-J5 G Series User Manual, available exclusively at manualshive.com.

Share
Download
background image

118

3  BASIC FUNCTION
3.12  Assigning I/O devices

Setting method [G] [WG]

Servo parameter list

Input/output device selection, input signal automatic ON selection, input signal filter selection, and DI pin polarity selection 
settings can be performed directly with servo parameters.

■

MR-J5-_G_

*1 Available on servo amplifiers with firmware version A5 or later.

■

MR-J5W_-_G_

*1 Available on servo amplifiers with firmware version A5 or later.

Servo 
parameter

Symbol

Name

Outline

PD01.2

*DIA1

Input signal automatic ON 
selection

LSP (Forward rotation stroke end) and LSN (Reverse rotation stroke end) can be set 
to be used as external input signals, or to be automatically turned on.
Initial value: 0h (Use for an external input signal)

PD03.0-1

*DI1

Device selection

Any input device can be assigned to the CN3-2 pin.
Initial value: 0Ah (LSP (Forward rotation stroke end))

PD04.0-1

*DI2

Device selection

Any input device can be assigned to the CN3-12 pin.
Initial value: 0Bh (LSN (Reverse rotation stroke end))

PD05.0-1

*DI3

Device selection

Any input device can be assigned to the CN3-19 pin.
Initial value: 22h (DOG (Proximity dog))

PD07.0-1

*DO1

Device selection

Any output device can be assigned to the CN3-13 pin.
Initial value: 05h (MBR (Electromagnetic brake interlock))

PD08.0-1

*DO2

Device selection

Any output device can be assigned to the CN3-9 pin.
Initial value: 04h (INP (In-position))

PD09.0-1

*DO3

Device selection

Any output device can be assigned to the CN3-15 pin.
Initial value: 03h (ALM (Malfunction))

PD11.0

*DIF

Input signal filter selection

The input signal filter can be selected.
Initial value: 7h (3.500 [ms])

PD60.0-1 

*1

*DIP

DI pin polarity selection

The polarity of the DI pins can be selected.
Initial value: 00h (ON with 24 V input)

Servo 
parameter

Symbol

Name

Outline

PD01.2

*DIA1

Input signal automatic ON 
selection

LSP (Forward rotation stroke end) and LSN (Reverse rotation stroke end) can be set 
to "Disabled" (use for an external input signal.) or "Enabled" (Automatic on).
Initial value: 0h (Disabled (Use for an external input signal.))

PD03.0-1

*DI1

Device selection

Any input device can be assigned to the CN3-7 pin (A-axis), CN3-20 pin (B-axis), and 
CN3-1 pin (C-axis).
Initial value: 0Ah (LSP (Forward rotation stroke end))

PD04.0-1

*DI2

Device selection

Any input device can be assigned to the CN3-8 pin (A-axis), CN3-21 pin (B-axis), and 
CN3-2 pin (C-axis).
Initial value: 0Bh (LSN (Reverse rotation stroke end))

PD05.0-1

*DI3

Device selection

Any input device can be assigned to the CN3-9 pin (A-axis), CN3-22 pin (B-axis), and 
CN3-15 pin (C-axis).
Initial value: 22h (DOG (Proximity dog))

PD07.0-1

*DO1

Device selection

Any input device can be assigned to the CN3-12 pin (A-axis), CN3-25 pin (B-axis), 
and CN3-13 pin (C-axis).
Initial value: 05h (MBR (Electromagnetic brake interlock))

PD08.0-1

*DO2

Device selection

Any output device can be assigned to the CN3-24 pin (common).
Initial value: 04h (INP (In-position))

PD09.0-1

*DO3

Device selection

Any output device can be assigned to the CN3-11 pin (common).
Initial value: 03h (ALM (Malfunction))

PD11.0

*DIF

Input signal filter selection

The input signal filter can be selected.
Initial value: 7h (3.500 [ms])

PD60.0 

*1

*DIP

DI pin polarity selection

The polarity of the DI pins can be selected.
Initial value: 0h (ON with 24 V input)

Summary of Contents for Melservo MR-J5 G Series



























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Melservo MR-J5 G Series

Ibanez Sound Wave 115S Owner'S Manual preview
Sound Wave 115S
Brand: Ibanez Pages: 2
Questyle Audio CMA800P User Manual preview
CMA800P
Brand: Questyle Audio Pages: 6
E&I 3100LA Quick Start Manual preview
3100LA
Brand: E&I Pages: 12
Dexon SAC 2090 Owner'S Manual preview
SAC 2090
Brand: Dexon Pages: 22
ESX vision2 Series Owner'S Manual preview
vision2 Series
Brand: ESX Pages: 20
E&Q AVHR-5000 Installation & User Manual preview
AVHR-5000
Brand: E&Q Pages: 14
Gibson Tube Location GA-9 Schematic Diagram preview
Tube Location GA-9
Brand: Gibson Pages: 1
RE Audio XTX 1500.1 Owner'S Manual preview
XTX 1500.1
Brand: RE Audio Pages: 12
AKG CA810 Manual preview
CA810
Brand: AKG Pages: 16
Crest Audio VS1500 Specifications preview
VS1500
Brand: Crest Audio Pages: 2
Surpass SP-150MB User Manual preview
SP-150MB
Brand: Surpass Pages: 14
Advance Paris A10 Classic Quick Start Manual preview
A10 Classic
Brand: Advance Paris Pages: 28
Marshall Amplification Valvestate VS100 Handbook preview
Valvestate VS100
Brand: Marshall Amplification Pages: 12
Crown Macro-Tech MA-3600VZ Operation Manual preview
Macro-Tech MA-3600VZ
Brand: Crown Pages: 28
Lenz Digital Plus LZV100 Information Manual preview
Digital Plus LZV100
Brand: Lenz Pages: 16
S.M.S.L HO100 User Manual preview
HO100
Brand: S.M.S.L Pages: 10
Radial Engineering TankDriver 500 User Manual preview
TankDriver 500
Brand: Radial Engineering Pages: 8
Harley Benton HB-40B User Manual preview
HB-40B
Brand: Harley Benton Pages: 28

Brands by name

Popular brands

Load more brands