2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATION
(3) Supported software packages
The following table lists the compatibility between the systems using the QD75 and
the software packages. GX Developer or GX Works2 is required for use of the
QD75.
Software version
GX Developer
GX Configurator-QP
*1
GX
Works2
Q00J/Q00/Q01CPU
Single CPU
system
Version 7 or later
Version 2.10L or later
Refer to GX Works2
Version 1 Operating
Manual (Common).
Multiple CPU
system
Version 8 or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Single CPU
system
Version 4 or later
Version 2.00A or later
Multiple CPU
system
Version 6 or later
Q02PH/Q06PHCPU
Single CPU
system
Version 8.68W or
later
Version 2.29F or later
Multiple CPU
system
Q12PH/Q25PHCPU
Single CPU
system
Version 7.10L or
later
Version 2.13P or later
Multiple CPU
system
Q02U/Q03UD/
Q04UDH/
Q06UDHCPU
Single CPU
system
Version 8.48A or
later
Version 2.25B or later
Multiple CPU
system
Q13UDH/Q26UDH/
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Single CPU
system
Version 8.68W or
later
Version 2.29F or later
Multiple CPU
system
Q00U/Q00UJ/Q01U/Q
10UDH/Q20UDH/
Q10UDEH/
Q20UDEHCPU
Single CPU
system
Version 8.76E or
later
Version 2.32J or later
Multiple CPU
system
CPU modules other than above
Not supported
Not supported
For use on MELSECNET/H remote I/O
station
Version 6 or later
Version 2.00A or later
1: To use the QD75P N/QD75D N with GX Configurator-QP, select the
QD75P /QD75D as the model name. The QD75P N/QD75D N can be used in the
same manner as the QD75P /QD75D ; the setting ranges are the same. Therefore, a
speed exceeding 1000000pulse/s cannot be set in some items. (Refer to Appendix 1.2)
POINT
When using GX Works2, refer to the following:
GX Works2 Version 1 Operating Manual (Common)
GX Works2 Version 1 Operating Manual (Intelligent Function Module)
Summary of Contents for D75D4
