Mitsubishi Electric D75D4, User Manual

Page: 54 / 896

2 - 6
MELSEC-Q
2 SYSTEM CONFIGURATION
2.3 Applicable system
The QD75 can be used in the following system.
(1) Applicable modules and base units, and No. of modules
(a) When mounted with a CPU module
For the CPU modules, the number of modules, and base units applicable to
the QD75, refer to the user's manual for the CPU modules used.
Check the following when the QD75 is mounted with the CPU module.
 Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient. Pay
attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
 Mount a module within the number of I/O points for the CPU module.
If the number of slots is within the available range, the module can be
mounted on any slot.
REMARK
To use a C Controller module with the QD75, refer to C Controller Module User's
Manual.
(b) Mounting to a MELSECNET/H remote I/O station
For the MELSECNET/H remote I/O station, the number of modules, and
base units applicable to the QD75, refer to the Q Corresponding
MELSECNET/H Network System Reference Manual (Remote I/O network).
(2) Compatibility with multiple CPU system
When using the QD75 in a multiple CPU system, refer to the QCPU User's
Manual (Multiple CPU System).