Mitsubishi Electric D75D4, User Manual

Page: 133 / 896

5 - 29
MELSEC-Q
5 DATA USED FOR POSITIONING CONTROL
Pr.17 Torque limit setting value
Set the maximum value of the torque generated by the servomotor as a
percentage between 1 and 500%.
The torque limit function limits the torque generated by the servomotor within
the set range.
If the torque required for control exceeds the torque limit value, it is controlled
with the set torque limit value.
Usage conditions
Limits for pulse train output type
(a) A drive unit that can issue a torque limit command with the analog voltage is
required.
(b) The D/A conversion module and the D/A conversion module and drive unit
must be wired.
(c) The set " Pr.17 Torque limit setting value" is set in the buffer memory
" Md.35 Torque limit stored value", so transmit that " Md.35 Torque limit
stored value" to the D/A conversion module with the sequence program.
[Table 1]
Pr.1 setting value
Value set with peripheral device
(unit)
Value set with sequence program
(unit)
0 : mm 0.1 to 214748364.7 (µm)
1 to 2147483647 (×10
–1
µm)
1 : inch 0.00001 to 21474.83647 (inch) 1 to 2147483647 (×10
–5
inch)
2 : degree 0.00001 to 21474.83647 (degree) 1 to 2147483647 (×10
–5
degree)
3 : pulse 1 to 2147483647 (pulse) 1 to 2147483647 (pulse)