MitraStar Movistar GPT-2541GNAC, User Manual

Page: 26 / 226

Chapter 3 WAN 26
3.1.1 Layer-2 GPON Interface Configuration
Click the Add button in the Layer2 Interface: GPON Interface screen to open the following screen.
Use this screen to create a new layer-2 interface.
Figure 13 GPON Interface Configuration
Select the GPON port and click Apply/Save .
The following table describes the fields in this screen.
Table 11 GPON Interface Configuration
LABEL DESCRIPTION
Select a GPON
port
Select a GPON port. veip0 stands for a virtual Ethernet card and is the foundation
for veip0/* which are virtual WAN interfaces of the physical GPON line.
Back Click this button to return to the previous screen without saving any changes.
Apply/Save Click this button to save your changes and go back to the previous screen.
3.2 Ethernet Layer2 Interface
The Router must have a layer-2 interface to allow users to use the Gigabit Ethernet port to access
the Internet. Log into the Router’s Web Configurator and click Advanced Setup > Layer2 Interface
> ETH Interface to manage the Ethernet layer-2 interface.

The GPON and ETH layer-2 interfaces cannot work at the same time.
Figure 14 ETH Interface