Chapter 25 SNMP
208
SNMP itself is a simple request/response protocol based on the manager/agent model. The
manager issues a request and the agent returns responses using the following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
Click
Management > SNMP Agent
to open the following screen. Use this screen to configure the
Router SNMP settings.
Figure 128
Management > SNMP Agent
The following table describes the fields in this screen.
Table 116
Management > SNMP Agent
LABEL
DESCRIPTION
SNMP Agent
Select
Enable
to let the Router act as an SNMP agent, which allows a manager
station to manage and monitor the Device through the network. Select
Disable
to
turn this feature off.
Read Community
Enter the
Read Community
, which is the password for the incoming Get and
GetNext requests from the management station.
Set Community
Enter the
Set community
, which is the password for incoming Set requests from the
management station.
System Name
Enter the SNMP system name.
System Location
Enter the SNMP system location.
Summary of Contents for Movistar GPT-2541GNAC
