MitraStar Movistar GPT-2541GNAC, User Manual

Page: 12 / 226

Chapter 1 Introduction 12
1.4 Advanced Configuration
Do the following to access the advanced configuration screens.
Telf Blue On The SIP registration is successful.
Blinking The Router is negotiating the SIP registration.
Green On There is incoming or outgoing voice traffic.
Red Blinking The Router has failed to register the VoIP service.
Off There is no VoIP service.
Wifi/WPS Blue On The 2.4 GHz wireless is on.
Blinking The 2.4 GHz WPS is activated. It also blinks when the Router is
setting up a WPS connection.
Off The 2.4 GHz wireless is not activated.
Wifi5GHz/
WPS
Blue On The 5 GHz wireless is on.
Blinking The 5 GHz WPS is activated. It also blinks when the Router is setting
up a WPS connection.
Off The 5 GHz wireless is not activated.
Internet Blue On The Router has a PPP connection but no traffic.
It has a WAN IP address (either static or assigned by a DHCP server),
PPP negotiation was successfully completed (if used).
Blinking Startup process. The Router is running an automatic startup
diagnostic process on the GPON port.
Fast Blinking The Router is sending or receiving IP traffic.
The Router is synchronizing with the PON. Activation phase. The
Router is negotiating a PPP connection.
Red On The Router attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response,
PPPoE authentication failed.
The GPON port failed during the POST (Power On Self Test) or there
is an error due to hardware or firmware failure.
Blinking The GPON port’s optical power level is below the threshold.
Off There is no Internet connection.
Table 2 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION