MitraStar Movistar GPT-2541GNAC User Manual Download Page 100

Page: 100 / 226

Chapter 11 DNS

100

The following table describes the fields in this screen.

Table 58

DNS Server

LABEL

DESCRIPTION

Select DNS Server

Interface from

available WAN

interfaces

Select this to have the Router get the DNS server addresses from one of the

Router’s WAN interfaces.

Selected DNS

Server Interfaces

Select a WAN interface through which to get DNS server addresses.
You can select multiple WAN interfaces for the device to try. The Router tries the

WAN interfaces in the order listed and uses only the DNS server information of

the first WAN interface that connects; there is no backup WAN function. To

change the priority order remove them all and add them back in again.

Available WAN

Interfaces

These are the WAN interfaces you can select from.

Use the following

Static DNS IP address

Select this to have the Router use the DNS server addresses you configure

manually.

Primary DNS

server

Enter the first DNS server address assigned by the ISP.

Secondary DNS

server

Enter the second DNS server address assigned by the ISP.

Obtain IPv6 DNS info

from a WAN interface

Select this to have the Router get the IPv6 DNS server addresses from the ISP

automatically.

Selected IPv6 DNS

Server Interfaces

Select an IPv6 WAN interface through which you want to obtain the IPv6 DNS

related information.

Available IPv6

WAN Interfaces

These are the IPv6 WAN interfaces you can select from.

Use the following

Static IPv6 DNS

address

Select this to have the Router use the IPv6 DNS server addresses you configure

manually.

Primary IPv6 DNS

server

Enter the first IPv6 DNS server address assigned by the ISP.

Secondary IPv6

DNS server

Enter the second IPv6 DNS server address assigned by the ISP.

Apply/Save

Click this button to save your changes.

11.2 Dynamic DNS

Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic

DNS services. You need to have registered a dynamic DNS account with www.dyndns.org. This is for

people with a dynamic IP from their ISP or DHCP server that would still like to have a domain name.

Summary of Contents for Movistar GPT-2541GNAC



































































































































































































































Search results

Summary of Contents for Movistar GPT-2541GNAC

Reviews:

Related manuals for Movistar GPT-2541GNAC

Brands by name

Popular brands

MitraStar Movistar GPT-2541GNAC, User Manual

Search results

Summary of Contents for Movistar GPT-2541GNAC

Reviews:

Related manuals for Movistar GPT-2541GNAC

Brands by name

Popular brands