MitraStar Movistar GPT-2541GNAC, User Manual

Page: 51 / 226

Chapter 4 LAN 51
Table 25 LAN Additional Subnet
LABEL DESCRIPTION
Active Select the check box to configure a LAN network for the Router.
IP Address Enter the IP address of your Router in dotted decimal notation.
IP Subnet Mask Your Router will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the Router.
Offer Public IP by
DHCP
Select the check box to enable the Router to provide public IP addresses by DHCP
server.
Enable ARP Proxy Select the check box to enable the ARP (Address Resolution Protocol) proxy.
Apply/Save Click this button to save your changes and go back to the previous screen.
4.3 LAN VLAN
Click Advanced Setup > LAN > LAN VLAN to open this screen. Use this screen to control the VLAN
ID and IEEE 802.1p priority tags of traffic sent out through individual LAN ports.
Figure 28 LAN VLAN
Table 26 LAN VLAN
LABEL DESCRIPTION
Select a LAN
port
eth0 ~ eth3 represent the Ethernet LAN ports 1 ~ 4. Select a port.
Enable VLAN
Mode
Select this to use VLAN on the LAN port you selected.
VLAN ID Specify the VLAN ID (from 0 to 4094) to use for this LAN port’s downstream traffic.