MitraStar Movistar GPT-2541GNAC, User Manual

Page: 142 / 226

Chapter 20 Wireless 142
Enable Wireless
Multicast
Forwarding
Select this check box to have the Router convert wireless multicast traffic (IGMP version 2
or 3) into wireless unicast traffic to reduce the traffic load. This function can improve the
transmission quality of video services (for example, IPTV).
SSID Enter a descriptive name for the wireless LAN.
BSSID This shows the MAC address of the wireless interface on the Device when wireless LAN is
enabled.
Country Select the country you have the Router in. This has the Router use the correct frequency
bands.
Country
RegRev
Specify the sub-revision of the regulatory locale table for the country code.
Max Clients Set a limit for how many wireless clients can connect to the Router at a time.
Wireless Guest/
Virtual Access
Points
Use this section to enable and configure multiple wireless networks on the Router.
Enabled Select this to activate the wireless network.
SSID The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
Note: If you are configuring the Router from a computer connected to the wireless LAN
and you change the Router’s SSID or WEP settings, you will lose your wireless
connection when you press Save/Apply to confirm. You must then change the
wireless settings of your computer to match the Router’s new settings.
Hidden Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Isolate Clients Select this to isolate wireless clients from accessing others in the same wireless network.
Enable WMF Select this check box to improve the wireless transmission quality for multicast frames. It
is recommended to select this for video streaming application.
Max Clients Set a limit for how many wireless clients can connect to the wireless network at a time.
BSSID This shows the MAC address of the wireless network on the Device when the wireless
network is enabled.
Apply/Save Click this button to save your changes.
Table 84 Wireless Basic (continued)
LABEL DESCRIPTION