MitraStar Movistar GPT-2541GNAC, User Manual

Page: 49 / 226

Chapter 4 LAN 49
4.1.1 Add DHCP Static IP Lease
Click Add Entries in the LAN Setup screen to display the following screen.
Figure 26 Add DHCP Static IP Lease
Gateway Enter the IPTV server’s IP address.
Subnet Mask Enter the IPTV server’s subnet mask.
Pool Start/End Specify the first and last of the contiguous addresses in the IPTV server’s IP address
pool.
DNS Server 1/2 Enter the IPTV server’s first/second DNS server IP address.
VendorID Specify the IPTV’s vendor ID.
VendorID Mode Specify the IPTV’s vendor ID mode type.
VendorID Exclude Specify if you want to enable vendor ID exclude.
Option240 State Select Enabled to have the Router assign DHCP option 240 to the LAN set top box.
Option240 Value Enter the option 240 value.
Configure the
second IP Address
and Subnet Mask
for LAN interface
Select the check box to use IP alias to configure another LAN network for the Router.
IP alias partitions a physical network into different logical networks over the same
Ethernet interface. The Router supports multiple logical LAN interfaces via its
physical Ethernet interface with the Router itself as the gateway for the LAN
network. You can also configure firewall rules to control access to the LAN's logical
network (subnet).
IP Address Enter the second LAN IP address of your Router in dotted decimal notation.
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default).
Table 23 LAN Setup (continued)
LABEL DESCRIPTION