manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 74

3-10

Adjusting suitable temperature adjustment (When solvent ink is used)

This section describes the procedure for setting the heater temperatures properly.
The proper heater temperatures depend on the media type and ambient temperature. Set temperatures that 
are appropriate to the media. For non-coated media or media on which ink is slow to dry, set the heater 
temperatures so that the ink fixing and drying characteristics will be improved.

Wait until the CONSTANT lamps light up.

Set the heater temperatures (

P.3-8)

Correct the media feed rate (

P.3-5)

Yes

No

Is media wrinkled?

Test printing

Does media stick to platen?

Does beading occur?

END

Lower the heater 

temperatures

Raise the heater 

temperatures

Move the media back 
and forth with [ ^ ] and 
[ v ] keys.

Initially, set higher 
temperatures

No

No

Yes

Yes

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands